In the frame
Seen from above, a white sailboat lies at anchor in a turquoise bay. Dark coral patches show through the clear water, a white beach curves along the shore, and a dense green forest fills the top.
This dive leaves all 15 tiles of a 5 × 3 board in place but rotates them by 90, 180 or 270 degrees. Tap each tile until the whole picture stands upright.
Dive plan
- Start with the easy part: the sailboat and the curve of white beach.
- Save for last: the deep blue water. About 34% of the frame has little detail, mostly on the right side, and those pieces look alike.
- Each tap turns a tile a quarter clockwise; right-click or Shift+Enter turns it back.
- Start with tiles that contain a horizon, a body or a straight edge — their upright position is obvious.
- For plain tiles, follow the light: water and sky usually get brighter towards the top of the picture.
- Plain tiles can look right at two angles; check the direction of the light and the texture.
Colours of the picture
Main colours, measured from the picture's pixels: teal (51%), slate grey (28%), lagoon green (12%) and charcoal (10%).
- teal51%
- slate grey28%
- lagoon green12%
- charcoal10%
How deep it goes
Depth 4 of 5 — a demanding dive.
Wall dives drop off into bigger boards, where the plain parts of a picture start to slow you down.